Technical programme

C2.1. Space Structures I - Development and Verification (Space Vehicles and Components)

The topics to be addressed include evaluation of analysis versus test results, spacecraft and launch vehicles system and subsystems, e.g. pressurised structures, tanks, loads introduction, primary structures, fluidic equipment, control surfaces; examination of both on-ground and in-orbit testing, launch dynamic environment as related to structural design, space vehicles development and launch verification such as sine, random and acoustic vibration testing and lessons learned.

C2.2. Space Structures II - Development and Verification (Deployable and Dimensionally Stable Structures)

The topics to be addressed include evaluation of analysis versus test results for deployable and dimensionally stable structures, e.g. reflectors, telescopes, antennas; examination of both on-ground and in-orbit testing, thermal distortion and shape control, structural design, development and verification; lessons learned.

C2.3. Space Structures - Dynamics and Microdynamics

The topics to be addressed include dynamics analysis and testing, modal identification, landing and impact dynamics, pyroshock, test facilities, vibration suppression techniques, damping, micro-dynamics, in-orbit dynamic environment, wave structural propagation, excitation sources and in-orbit dynamic testing.

C2.4. Advanced Materials and Structures for High Temperature Applications

The topics to be addressed include advanced materials and structures for high temperature applications in space related domains. This includes carbon-carbon and ceramic matrix composites, ultra high temperature ceramics, ablative materials, ceramic tiles and insulations, together with innovative structural concepts making use of the above, for propulsion systems, launchers, hypersonic vehicles, entry vehicles, aero capture, power generation. The session covers the full spectrum of material, design, manufacturing and testing aspects.

C2.5. Smart Materials and Adaptive Structures

The focus of the session will be on application of smart materials to spacecraft and launch vehicle systems, novel sensor and actuator concepts and new concepts for multi- functional and intelligent structural systems. Also included in the session will be new control methods for vibration suppression and shape control using adaptive structures as well as comparisons of predicted performance with data from ground and in-orbit testing.

C2.6. Space Environmental Effects and Spacecraft Protection

The focus of the session will be on space environmental effects and spacecraft protection. The effects of vacuum, radiation, atomic oxygen, spacecraft charging, thermal cycling, dissociation, meteoroids and space debris impact on space systems, materials and structures, and microelectronics will be addressed. Protective and shielding technologies, including analysis simulation and testing of debris impact, and susceptibility of Commercial-Off-The-Shelf (COTS) micro-electronics to space radiation will be covered.

C2.7. Space Vehicles – Mechanical/Thermal/Fluidic Systems

The topics to be addressed include novel technical concepts for mechanical/thermal/fluidic systems and subsystems of launchers, manned and unmanned spacecraft, re-entry vehicles and small satellites. Advanced subsystems and design of future exploration missions will be covered, considering issues arising from material selection, cost efficiency and reliability, and advancements in space vehicle development with respect to engineering analysis, manufacturing, and test verification.

C2.8. Specialised Technologies, Including Nanotechnology

Specialised material and structures technologies are explored in a large variety of space applications both to enable advanced exploration, and science/observation mission scenarios to perform test verifications relying on utmost miniaturisation of devices and highest capabilities in structural, thermal, electrical, electromechanical/ optical performances offered by the progress in nanotechnology. Examples are the exceptional performances at nano-scale in strength, electrical, thermal conduction of Carbon nanotubes which are experiencing first applications at macro-scale such as nano-composite structures, high efficiency energy storage wheels, MEMS and MOEMS devices. Molecular nanotechnology and advances in manipulation at nano-scale offer the road to molecular machines, ultracompact sensors for science applications and mass storage devices. The Session encourages presentations of specialised technologies, in particular of nanomaterial related techniques and their application in devices offering unprecedented performances for space applications.

C2.9. Advancements in Materials Applications and Rapid Prototyping

The topics to be addressed include advancements in materials applications and novel technical concepts in the rapid prototyping of mechanical systems.

C2.P. Poster Session