Robotic and Human-tended Collaborative Drilling Automation for Subsurface Exploration
- Paper number
IAC-05-A5.2.01
- Author
Dr. Brian Glass, National Aeronautics and Space Administration (NASA)/Ames Research Center, United States
- Coauthor
Mr. Howard Cannon, National Aeronautics and Space Administration (NASA)/Ames Research Center, United States
- Coauthor
Dr. Carol Stoker, National Aeronautics and Space Administration (NASA)/Ames Research Center, United States
- Year
2005
- Abstract
Not long after launch of the Chandra X-Ray Observatory, it was discovered that the Advanced CCD Imaging Spectrometer (ACIS) detector was rapidly degrading due to radiation. Analysis by Chandra personnel showed that this degradation was due to low energy protons (100 – 200 keV) that scattered down the optical path onto the focal plane. In response to this unexpected problem, the Chandra Team developed a radiation-protection program that has been used to manage the radiation damage to the CCDs. This program consists of multiple approaches – scheduled safing of the ACIS detector from the radiation environment during passage through radiation belts, real-time monitoring of space weather conditions, on-board monitoring of radiation environment levels, and the creation of a radiation environment model for use in computing proton flux and fluence at energies that damage the ACIS detector . This radiation mitigation program has been very successful. The initial precipitous increase in the CCDs’ charge transfer inefficiency (CTI) resulting from proton damage has been slowed dramatically, with the front-illuminated CCDs having an increase in CTI of only 2.3% per year, allowing the ASIS detector’s expected lifetime to exceed requirements.
This paper concentrates on one aspect of the Chandra radiation mitigation program, the creation of the Chandra Radiation Model (CRM). Because of Chandra’s highly elliptical orbit, the spacecraft spends most of its time outside of the trapped radiation belts that present the severest risks to the ACIS detector. However, there is still a proton flux environment that must be accounted for in all parts of Chandra’s orbit. At the time of Chandra’s launch there was no engineering model of the radiation environment that could be used in the outer regions of the spacecraft’s orbit, so the CRM was developed to provide the flux environment of 100 – 200 keV protons in the outer magnetosphere, magnetosheath, and solar wind regions of geospace. This presentation describes CRM, its role in Chandra operations, and its prediction of the ACIS CTI increase.
- Abstract document
- Manuscript document
IAC-05-A5.2.01.pdf (🔒 authorized access only).
To get the manuscript, please contact IAF Secretariat.