Optimization of stiffened cylindrical shell of propellant tanks
- Paper number
IAC-08.C2.1.2
- Author
Mr. HUANG CHENG, CASC, China
- Coauthor
Mr. Wang Jiang, Beijing Institute of Astronautical Systems Engineering, China
- Year
2008
- Abstract
In order to minimize the weight of the structure and improve the efficiency of the launch, an optimization of the propellant tank of launch vehicle is carried out. The propellant tank is usually made of stiffened cylindrical shell with (-45º,45º) quadrangle grid or (0, -30º,30º) isogrid. The theoretical and experimental investigation is focused on the optimization of angle of the grid of stiffened tank subjecting to axial pressure in the flight. It is shown that the optimum angle is about (-39º,39º),which is related to the ratio of the mass of ribs and shell. A range of the optimum ratio is usually between 0.4 to 0.6. The study indicates the critical axial pressure of cylindrical shell stiffened by the optimizational grid is higher 20% to 27% than that by (-45º,45º)quadrangle grid.
- Abstract document
- Manuscript document
IAC-08.C2.1.2.pdf (🔒 authorized access only).
To get the manuscript, please contact IAF Secretariat.