Experimental Investigation of the Emissivity of the EXPERT Flap in SCIROCCO Plasma Wind Tunnel Tests
- Paper number
IAC-12,C2,1,11,x15240
- Author
Dr. Carlo Purpura, CIRA Italian Aerospace Research Centre, Italy
- Coauthor
Dr. Eduardo Trifoni, CIRA Italian Aerospace Research Centre, Italy
- Coauthor
Prof. Francesco Paolo Barrera, University of Palermo, Italy
- Coauthor
Mr. Giuseppe De Gaetano, University of Palermo, Italy
- Year
2012
- Abstract
In the frame of the ESA EXPERT project, a test campaign on the Open Flap PL 6/8 of the EXPERT space vehicle has been executed at CIRA in the facility SCIROCCO Plasma Wind Tunnel. The Flap was manufactured by MT Aerospace and is made by Keraman C/SiC material. In order to measure the temperature of the surface achieved during the tests, the application of non-intrusive instrumentation has been performed. There were applied optical instruments such as dual color pyrometer and thermocamera operating in the near-infrared spectral wavelength range (NIR, $\lambda$$>$0.65 $\mu$m) and looking at the model from the same sight. The thermocamera needs to operate with a known emissivity of the material under test, but it is well known that the emissivity of a material could change increasing its temperature. In fact during the re-entry phase of a space vehicle, the temperature of the surface increases giving rise to the changes of the material physical properties. Now, after the development of the test campaign on the EXPERT Flap, the study of the material emissivity has been performed by properly analysing the temperature measurements detected through the thermocamera and the pyrometer. The results of such investigation will be shown giving evidence of the big importance of the proper knowledge of the material emissivity behaviour
- Abstract document
- Manuscript document
IAC-12,C2,1,11,x15240.pdf (🔒 authorized access only).
To get the manuscript, please contact IAF Secretariat.