IP. Interactive Presentations

Papers

1. Dynamics Analysis of Flexible Cone Undergoing Space Docking

2. Ka Band Metal Wire Mesh Development for Deployable Reflector

3. A new multi-layer and graded-density flexible ablator

4. research on the frequency characterization method of structural design

5. Research on Active Flutter Suppression Using Robustic Control Methodology for Reusable Launch Vehicle

6. aerodynamic design of a lifting re-entry vehicle for real gas effect flight test

7. Transfer Path Analysis of Dynamic Loading for the Second stage Liquid Rocket Engine

8. The influence factor of the dispersibility of carbon nano tube in epoxy resin

9. Effect of Rectangular Nozzle Water-Cooling Wall on the Total Enthalpy Loss of High Temperature Airflow in Arc-Heated Wind Tunnel

10. dynamic properties study and optimization of astronautic separation products with different extension and compression stiffness

11. Studies on Aero Thermodynamics performance of the rudder with Zero Sweepback in Arc Heated Tunnel

12. Design and optimization of flat type loop heat pipe with multiple parallel evaporators

13. a new approach based on metallographic analysis and micro Hardness test on evaluating the temperature of reusable ramjet engine

14. structural design and topology optimization of a university micro-satellite

15. an immersed boundary method for compressible flow simulation

16. Study on Satellite segment vibration test technology

17. Study on thermal protection materials ablation resulting in changes of flow field parameters in supersonic turbulent duct on arc heater

18. Experimental study of low density thermal insulation materials on radiation heating facility with variable pressure

19. The establishment of dynamic model for the single-phase fluid loop system

20. Experimental Investigation on the Decomposition Rate of Phenolic Resin Thermal Protection Material

21. CVD methods for graphene generation on stainless steels for corrosion resistance

22. Aerodynamic force and heat fast prediction for high speed vehicles based on effective numerical and engineering methods

23. A Study of Compressibility Corrections for k-omega SST Turbulence Model in Hypersonic Flow Applications

24. Experimental study on the thermal control device using the solid-liquid phase change material

25. Structural analysis of a critical deviation observed at an Interface in a Solid Rocket booster Motor using strain based acceptance criteria

26. A study on the start-up, blocking-up and operating characteristics of loop heat pipe

27. REACTION CONTROL OF FLEXIBLE JOINT SPACE MANIPULATORS

28. Time-variant Reliability Analysis of Cabin's Door Considering Component Damage

29. Verification with quasi-static tests of composite structures for launchers, satellite and re-entry vehicles

30. Design and verification of high pressure high purity gas delivery systems for International Space Station

31. Investigation of Cabin Pressure Prediction for Intake and Exhaust System on Re-entry Vehicles

32. A rapid method to calculate the viscous force based on local inviscid flow field parameters

33. Numerical and experimental activities to assess the compatibility of the IXV mock-up custom avionic systems with the splash down shock loads.

34. DESIGNING A STRUCTURE, ANTENNA AND SOLAR PANELS DEPLOYMENT SYSTEM FOR A STUDENT NANO SATELLITE BUS MODULE (NIUSAT MARK-I)

35. epoxy based shape memory polymers for space applications

36. Research Development of Thermal Protection Material in High Enthalpy Thermal Environment for Lunar Return Reentry

37. cnt-polyimide nanocomposites for space applications

38. Dynamic characteristic analysis of a moment control unit with vibration isolation capability and its application

39. Application of RANS/LES in Computing Hypersonic Turbulent Base Heating

40. The Design and Testing of Deployment Mechanisms and Structure of Twin Nano-Satellite, STUDSAT-2.

41. Reduction of processing time and human factor effects during the strength assessment of the spacecraft structure

42. research on repeatable locking mechanism for space solar array

43. Fold-Deployment Concept and Prototype Design for Air-Inflatable Solar Sail

44. Optimization of the cabin thermal environment control in a spacecraft on the ground preparation stage before launch

45. Design Aspects of Head End Mounted Safe Arm (HMSA) for Igniters of Solid Rocket Motors

46. Mechanism and kinetic characterization of the electron irradiation induced degradation of DGEBA/DICY

47. Development and Study of Micro-Vibration Simulation Analysis System for Small Satellites

48. Surface Figure Precision Analysis Research on Non-ideal Thin Film Solar Cells of Space Solar Power Satellite

49. shape optimization of inside-hole in triangular ribbed plate

50. A Boundary Element Method for Transient Nonlinear Radiative-Conductive Coupled Heat Transfer Problems

51. on the development of arc tunnel test technology for control surface seal evaluations

52. NOVEL IDENTIFICATION METHOD OF THE DYNAMIC PARAMETERS OF A SPACE MANIPULATOR