Demonstrator design for lunar In Situ Resource Utilisation and Oxygen production
- Paper number
IAC-18,A3,2C,1,x48461
- Author
Prof. Michèle Lavagna, Italy, Politecnico di Milano
- Coauthor
Dr. Paolo Lunghi, Italy, Politecnico di Milano
- Year
2018
- Abstract
the paper discusses the activities currently on going at Politecnico di Milano to design a demonstrator plant for ISRU to extract water from Moon regolith. The Carbothermal reduction (CRB) process, solid-gas based, using methane is here preferred to contain the endothermic reaction temperatures in the range of 950-1000°C. Former in house experimental activities, demonstrated the mentioned process is cost effective: almost no beneficiation is needed to obtain by far conversion efficiency higher than with other processes such as with hydrogen reduction. The reason why stays in the soil composition the most, being the CRB capable to attack the feedstock silicon oxide, representative of almost 50% of the lunar soil. However, during the methane reduction, the coke formation must be avoided to keep the whole process self-sustainable in the methane re-generation. Therefore, a low pressure reaction is preferred which increases the complexity for the reactor sealing strategy. The design here presented, while ensuring the already demonstrated process efficiency, focuses the more on the whole plant to be the more compliant with a potential inflight operational environment: alternatives on reactor automatic feeding with feedstock and gases, exhausted regolith from the CRB reactor automatic discharge, solid valves design for tight reactor sealing, thermal control to ensure the correct heat exchange at each plant stage are traded-offs and the preferred baseline is critically discussed.
- Abstract document
- Manuscript document
IAC-18,A3,2C,1,x48461.pdf (🔒 authorized access only).
To get the manuscript, please contact IAF Secretariat.