session P

Title: Poster Session
Date: 2013-09-25
Time: 13:30
Room: North Foyer

IPC members

Co-Chair: Dr. Constantinos P. Stavrinidis, IABG Industrieanlagen - Betriebsgesellschaft mbH, Germany;
Co-Chair: Prof. Pavel M. Trivailo, RMIT University, Australia, Australia;

papers
Order	Paper title	Selection result	Mode	Presentation status	Speaker	Affiliation	Country
1	a new servo mechanism named eccentuator	accepted	Poster	confirmed	Mrs. Zhou Bei	China Academy of Launch Vehicle Technology (CALT)	China
2	STUDY ON PHASED ARRAY ULTRASONIC NONDUSTRUCTIVE TESTING FOR ALUMINIUM ALLOY FRICTION STIR WELDING	accepted	Poster		Mrs. leena zhang		China
3	The Influence of Pre-oxidation on the Properties of PAN Based Carbon Fiber	accepted	Poster		Ms. gao fengge	EMC2	China
4	A New Method for CG Measurement in Determination of Mass Properties of Spacecrafts and Their Components	accepted	Poster	confirmed	Mr. Hamed Sheikh Bahaee	Iranian Space Agency (ISA)	Iran
5	design and examination of stage-separation connecting appliances of a missile	accepted	Poster		Ms. ronghui wang		China
6	water medium Hydraulic test methods for large liquid hydrogen tank	accepted	Poster	confirmed	Dr. peng weibin	Beijing Institute of Aerospace Systems Engineering, China Aerospace Science and Technology Corporation (CASC)	China
7	A new reliability evaluation method of solar array unfolding mechanics based on test data on ground and on-orbit flight data	accepted	Poster	confirmed	Dr. wei wang	Technology and Engineering Center for Space Utilization, Chinese Academy of Sciences	China
8	Research on The Detail Design of Aircraft Wings	accepted	Poster		Mr. liu guo-chun		China
9	Analysis of Coilable Lattice Mast	accepted	Poster		Mr. Yang Zhou	School of Aerospace and Mechanics, Tongji University	China
10	Application of Non-Probabilistic Statistical Energy Analysis in Spacecraft’s vibro-acoustic Environment Prediction	accepted	Poster	confirmed	Mr. Di Wu	China Academy of Launch Vehicle Technology (CALT)	China
11	Global Damping Configuration of Large Space Truss Structure Based on Energy Finite Element Analysis	accepted	Poster	confirmed	Mr. Lu Zhou	China Academy of Space Technology (CAST)	China
12	effects of the high-temperature loading on the structure dynamic behavior	accepted	Poster		Dr. Hao Cheng	Beijing Institute of Structure and Environmental Engineering (BISE)	China
13	Operational modal analysis of in-flight space launch vehicles on use of transmissibility measurements	accepted	Poster		Dr. Si-Da Zhou	Beijing Institute of Technology	China
14	trajectory and deformation coupling calculation model for plane motion of a slender body	accepted	Poster	confirmed	Dr. Liu Weiwei	China Academy of Launch Vehicle Technology (CALT)	China
15	constrained damping layer for dynamic loading attenuation of liquid rocket engine frame	accepted	Poster	confirmed	Dr. Binchao Li	Xi'an Aerospace Propulsion Institute	China
16	Observer-based two time control of free-flying flexible space manipulator	accepted	Poster	confirmed	Dr. xiaoyan yu	Fuzhou University	China
17	resonant fixture design and test verification on shaker srs test	accepted	Poster	confirmed	Dr. Aijun Ma	China Astronaut Research and Training Center	China
18	Vibration Suppression of Space Structures Using Control Moment Gyroscopes as Actuators	accepted	Poster	confirmed	Mr. Quan Hu	Beihang University	China
19	Analitical and Experimental Quantification of Stiffness and Damping for Dry Friction Dampers and Their Application to Impact.	accepted	Poster	withdrawn	Ms. Michelle Guzman		Mexico
20	Modeling and simulation of a micro-vibration attenuating system based on flexible satellite model	accepted	Poster		Dr. Haiping Liu	China Academy of Space Technology (CAST)	China
21	Nonlinear Vibration of a Bolt jointed Beam under Microslip	accepted	Poster	confirmed	Dr. ZHANG Xiang-meng	Research Center of Satellite Technology, Harbin Institute of Technology	China
22	Temperature Simulation Test of MTPS in Arc Tunnel	accepted	Poster	confirmed
23	Investigation on the design formulas for the nozzle flexible joint	accepted	Poster	confirmed	Mrs. qu zhuanli	The 41st Institute of the Fourth Academy, China Aerospace Science and Technology Corporation (CASC)	China
24	The effect of pore structure on strength and thermal conductivity of porous ZrO2 ceramics	accepted	Poster	confirmed	Mr. Jun Zhou	Aerospace Research Institute of Materials and Processing Technology(ARIMP)	China
25	RESEARCH ON INFLUENCE OF PREFORM PARAMETERS ON PROPERTIES OF CARBON/CARBON COMPOSITES	accepted	Poster	confirmed	Mr. JinHuang Zheng		China
26	Mechanical Properties Test of 2D C/C Composites	accepted	Poster	confirmed	Mr. WEI Lianfeng	Xi'an Aerospace Composites Materials Institute	China
27	Fiber Content effect on the performance of Carbon /Carbon composites	accepted	Poster		Mr. shao haicheng		China
28	Heat treatment temperature effect on the thermal-physical properties of Carbon/Carbon composites	accepted	Poster		Mr. li yongjun		China
29	Fibrous ceramic tiles for ultrahigh temperature thermal insulation	accepted	Poster	confirmed	Dr. Jingjing Sun		China
30	Advanced MoSi2/NbSi2/Nb5Si3 multilayer coating on niobium alloy for the bipropellant rocket engine	accepted	Poster	confirmed	Dr. Haiqing Li	China Academy of Launch Vehicle Technology (CALT)	China
31	Thermal structure analysis of nozzle throat to braided C/C composite	accepted	Poster		Mr. Liu Shuguang	The 41st Institute of the Fourth Academy, China Aerospace Science and Technology Corporation (CASC)	China
32	Study on EPDM insulation reinforced by PAA resin with excellent ablation and particles erosion resistance	accepted	Poster	confirmed	Ms. Wenli Wang	CASIC	China
33	the anisotropy of thermal conductivity in diborides of zirconium and hafnium	accepted	Poster	confirmed	Dr. Luo Xiaoguang	China Academy of Aerospace Aerodynamics (CAAA)	China
34	molding of low-cost composite ceramic insulation materials and its application in thermal protection of missile over large area	accepted	Poster	confirmed	Mr. zhengshuai yin		China
35	RESEARCH ON ANTI-OXIDATION OF C/C COMPOSITES PREPARED BY SILICON CONTAINING POLYARYLACETYLENES	accepted	Poster		Mr. JinHuang Zheng		China
36	effect of pyrolytic carbon interface on performance of c/c composite	accepted	Poster	confirmed	Mr. Jiantao Sun		China
37	Boundary condition on stress calculation of the nozzle fixed case	accepted	Poster		Mr. LIU YU	The 41st Institute of the Fourth Academy, China Aerospace Science and Technology Corporation (CASC)	China
38	study on on-orbit micro-vibration monitoring and adaptive control system	accepted	Poster	confirmed	Mr. XUAN ZHANG	CASC	China
39	special fiber sensor for spacecraft application	accepted	Poster	confirmed	Dr. Shi Qing	Beijing Research Institute of Telemetry (BRIT)	China
40	optimized thermal design of the gamma ray burst detector	accepted	Poster	confirmed	Ms. ying liu	Chinese Academy of Sciences	China
41	The Arc-heated Direct-Connected Testing Technology of Scramjet Combustor Thermal Protection System	accepted	Poster	confirmed	Mr. Jian-qiang Tu	China Academy of Aerospace Aerodynamics (CAAA)	China
42	Development of Environment Simulator GVU-600 for Russian ISS-Reshetnev	accepted	Poster	confirmed	Mrs. XIAOQIN RU	CAST	China
43	evaluation of prediction of InGaP2/GaAs/Ge solar cell performance in space radiation environment	accepted	Poster	confirmed
44	the study of atomic oxygen environment protection design and experiment techniques for spacecraft	accepted	Poster		Mr. Hua Zhang	Shanghai Institute of Satellite Engineering	China
45	An equipment for collecting quantitative harmful gases in the spacecraft cabin	accepted	Poster	withdrawn	Mr. Yao Yuhua	China Astronaut Research and Training Center	China
46	delamination growth behavior in laminated composites under compressive fatigue loads	accepted	Poster	confirmed	Dr. Lu Zhang	China Academy of Launch Vehicle Technology (CALT)	China
47	Empirical evaluation of thermal contact resistance of bolted joint configurations employed in satellite applications fitted with interface materials under vacuum conditions	accepted	Poster	confirmed	Mr. Esmaeil Moeini	Amirkabir University of Technology, AutSat Project	Iran
48	dsmc modeling of rarefied aerodynamic features for lunar exploration re-entry vehicle	accepted	Poster	confirmed	Mr. Jie Liang	Beihang University	China
49	Effect of a multi-disk aerospike on the aerothermodynamics of a reentry configuration	accepted	Poster		Mr. Rajesh Yadav	University of Petroleum and Energy Studies	India
50	A POSSIBLE FUTURE NEED OF AN ENFORCED THERMAL CONTROL OF THE EARTH	accepted	Poster	confirmed	Dr. Jose Sergio Almeida	Instituto Nacional de Pesquisas Espaciais (INPE)	Brazil
51	Research on The Aerodynamic Heating Feature of Plane-Symmetric Aircraft	accepted	Poster		Dr. Xudong LI	China Academy of Launch Vehicle Technology (CALT)	China
52	MOLECULAR DYNAMIC SIMULATION OF COMPONENT AND PLATE INTERFACES IN A NANOSATELLITE	accepted	Poster	withdrawn	Mr. Michael Kio	National Space Research and Development Agency (NASRDA)	United Kingdom
53	Vibration signals analysis for solid lubrication of rolling ball bearings	accepted	Poster	confirmed	Dr. Kaifeng Zhang	Lanzhou Institute of Physics	China
54	a new method to evaluate the damage extent of c/c composite material structure using acoustic emission technology	accepted	Poster		Ms. Haibei Gu	Beijing Institute of Structure and Environmental Engineering (BISE)	China
55	Minimum-Mass Heat Shield for a Neptune Aerocapture Mission	accepted	Poster	confirmed	Dr. Antonio Mazzaracchio	Sapienza Università di Roma	Italy
56	Research of bacterial antifungal decorative board used in space manned cabin	accepted	Poster	confirmed	Ms. jimei shi		China
57	Study on Ultra-temperature, High Heat Flux, Nonlinearity Aerodynamic Heating Environment Simulation and Thermo-machanical Testing Technique	accepted	Poster	confirmed	Prof. Dafang Wu	Beijing University of Aeronautics and Astronautics (BUAA)	China
58	A New Concept of Three-dimensional Full Five-directional Braided Composites	accepted	Poster	confirmed	Dr. Fan Zhang	Research & Development Center of China Academy of Launch Vehicle Technology	China
59	Potential applications of hybrid forming of aluminum alloys in aircrafts	accepted	Poster	confirmed	Dr. Jingqi Cai	China Academy of Launch Vehicle Technology (CALT)	China
60	New weld filler wire and method of restraint intensity decrease characterization for Al-Li alloy 2195	accepted	Poster	confirmed	Mr. Jiao Haojun	China Academy of Launch Vehicle Technology, China	China
61	research on composite high-pressure vessel technology applicable for space system	accepted	Poster	confirmed	Mrs. li cuiyun	Institute for Cooperation in Space (ICIS)	China
62	PRELIMINARY INVESTIGATION OF AN INNOVATIVE SHAPE DEFORMABLE SPACE ROVER USING DIELECTRIC ELASTOMER ACTUATORS	accepted	Poster		Dr. Davide Cuccato		Italy
63	Preliminary Study on Laser Beam Weldability of Direct Laser Fabricated GH4169 for Aerospace Applications	accepted	Poster	confirmed	Dr. Peng Dong	China Aerospace Science and Technology Corporation (CASC)	China
64	preparation and performance research of anti-electrostatic white thermal-control coatings for spacecrafts	accepted	Poster	confirmed	Mr. gang Ma	Beijing Spacecrafts,China Academy of Space Technology (CAST)	China
65	Analysis and prevention of cracking of carbonsteel components of aerospace product	accepted	15'	confirmed	Prof. Yao Chunchen	Jiang industries group co. ltd	China

session P

Order

Time

Paper title

Selection result

Mode

Presentation status

Speaker

Affiliation

Country