session IP

Title: Interactive Presentations - IAF MATERIALS AND STRUCTURES SYMPOSIUM
Description: This session offers a unique opportunity to deliver your key messages in an interactive presentation on any of the subjects of Materials and Structures addressed in the classic Sessions. The presentation will be displayed on a digital screen in a dedicated location and available for view by all Congress attendees for the entire Congress week. In addition, one afternoon is dedicated exclusively for the attendees to view the Interactive Presentations, and the author will be assigned a specific ten minute slot to personally present the topic and interact with the attendees present. The Interactive Presentation may take advantage of all electronic display capabilities, such as: PowerPoint charts, embedded hot links, pictures, audio and video clips etc. An award will also be presented to the author of the best Interactive Presentation in the C Category at a special ceremony. An Abstract that follows the standard format must be submitted by the deadline for standard IAC abstracts.
Date: 2018-10-04
Time: 13:15
Room: IP Hall

IPC members

Co-Chair: Prof. Paolo Gasbarri, University of Rome “La Sapienza”, Italy;
Co-Chair: Dr. Andreas Rittweger, DLR (German Aerospace Center), Germany;

papers
Order	Paper title	Mode	Presentation status	Speaker	Affiliation	Country
1	Experimental Studies on Aerothermal Fluid-Structure Interaction with Plastic Deformation	10	confirmed	Mr. Dennis Daub	DLR (German Aerospace Center)	Germany
2	Space systems structural analyses from modal parameters using a Python developed toolset, and additional pre/post-processing features	10	confirmed	Mr. José Luis Gasent-Blesa	University of Valencia	Spain
3	Graphene Functionalization using Transition Metal Oxide for Enhancing the Bifunctional Catalytic Ability of Nanoparticles	10	confirmed	Ms. Simranjit Grewal	The National AeroSpace Training And Research Center (THE NASTAR CENTER)	United States
4	Degradation studies of space materials at DLR-Bremen	10	withdrawn	Dr. Maciej Sznajder	German Aerospace Center (DLR), Bremen	Germany
5	Free vibrations of ultrathin deployable booms fabricated with nano-modified epoxy matrix	10	confirmed	Dr. Susanna Laurenzi	Sapienza University of Rome	Italy
6	Challenges in the design of ultralight mechanisms for deep space exploration - based on RPWI instruments for ESA JUICE mission	10	confirmed	Ms. Ewelina Ryszawa	Astronika	Poland
7	DEFIANT: A small mass-producible microsatellite platform for demanding applications under extreme cost and size constraints	10	confirmed	Dr. Benoit Larouche	Space Flight Laboratory, University of Toronto	Canada
8	Additive Manufacturing of Satellite Propulsion Systems	10	withdrawn	Mr. Andy Kieatiwong		United States
9	Effects of the center of mass motion on the attitude motion of a manipulator like-spacecraft in close proximity of RVD/B operations and the experimental validation of the results	10	confirmed	Mr. Luciano Unfried	Aeronautic Institute of Technology (ITA)	Brazil
10	The role of self-calibrating and redundant sensors in vibration monitoring of aerospace structures	10	confirmed	Dr. Antonio Ventura		Italy
11	Self Sensing Multifunctional Composite Material for Aerospace Applications	10	withdrawn	Mr. Phillip Atencio	New Mexico Tech	United States
12	Carbon fiber reinforced benzoxazine featuring shape memory behavior for temperature-dependent self-deploying spacecraft structures	10	confirmed	Mr. Hannes Schäfer	University of Bremen	Germany
13	Bio-mimicry: A possible natural solution to design sustainable habitat on Mars	10	confirmed	Mr. Avishek Ghosh	Loughborough University	United Kingdom
14	Development of a set of instruments for a small satellite mission to observe the LEO environment in the presence of a decreasing solar cycle	10	withdrawn	Mr. Isai Fajardo	Kyushu Institue of Technology	Japan
15	Additive Manufacturing with Amorphous Substrates	10	withdrawn	Mr. Nicholas McGhee		United States
16	Developmental Verification of the Launch of Cubesat Format Satellites from Small Spacecrafts	10	confirmed	Mr. Victor Leonov	Bauman Moscow State Technical University	Russian Federation
17	Controlling heat flow during additive manufacture to improve structural performance	10	confirmed	Mr. Thomas McMaster	University of Strathclyde, Glasgow	United Kingdom
18	Combining Additive Manufacturing and Biomimetics for the Optimization of Satellite Structures	10	confirmed	Mr. Daniel Vogel	Technische Universität München	Germany
19	Corrosion chemical kinetics and erosion effects due to Atomic Oxygen exposure of solar arrays for nano-satellites applications.	10	confirmed	Dr. Andrea Delfini	Sapienza University of Rome	Italy
20	fabrication and characteristic of black body system with nano-structured needle for on-board calibration of image sensor	10	confirmed	Ms. Seolhui Hwang	Hanbat National University	Korea, Republic of
21	Moisture induced combustion and fire safety	10	confirmed	Mr. Anirudh Nautiyal	SRM University, kattankulathur, chennai, INDIA	India
22	Distribution of Energy and Stress for Wrinkling Aerospace Laminated Membrane Structures	10		Dr. Xiao Xiao	University of South China	China
23	Single ring deployable truss mechanism for space antenna	10	withdrawn	Mr. AZEEMSHA S S	U R RAO SATELLITE CENTRE (URSC)	India
24	the thermally stabilized optical system of LAPAN's IR camera	10		Mr. Bustanul Arifin	Indonesian National Institute of Aeronautics and Space (LAPAN)	Indonesia
25	Design Structure, Dynamic Structure Simulation and Thermal Simulation of Surya Satellite-1	10	confirmed	Mr. Hery Steven Mindarno		Indonesia
26	a multi-scale method of mechanical and thermal coupling analysis for thermal protection structure	10	confirmed	Dr. Jin Yin	China Academy of Launch Vehicle Technology (CALT)	China
27	Structural Topology Optimization for a Light Six-DOF Space Robotic Manipulator	10	confirmed	Mr. songbo deng	China Academy of Launch Vehicle Technology(CALT)	China
28	Strain Measurement Technology of Thermal Structure in High Temperature Environment	10	withdrawn	Dr. HE GAO	China Academy of Aerospace Aerodynamics (CAAA)	China
29	Analysis and experimental investigation of thermal-stress-free fasteners under the multi factors	10	withdrawn	Mr. tao yongqiang		China
30	The Method of Fast Aeroheating Prediction for Aerospace Vehicles based on Reduced Order Model	10	withdrawn	Mr. Xun Wang	CALT,CASC	China
31	Active vibration control of flexible appendages of spacecraft in during attitude maneuver	10	confirmed	Mr. Zelin Wang	Dalian University of Technology (DUT)	China
32	Simulation calculation method and test verification of the axial connection stiffness of the clamp band device	10	confirmed	Mr. Shipeng KANG	Aerospace System Engineering Shanghai, China	China
33	Thermo structural Analysis of Solid Rocket scarfed Nozzle with composite Ablative Liners for Crew Escape Solid Motor	10	confirmed	Mr. Paul Murugan J	Indian Space Research Organization (ISRO)	India
34	A study on impacts of high enthalpy effect in designing arc jet wind tunnel experiments for High Temperature Thermal Protection Material	10	confirmed	Mr. Xun Wang	CALT,CASC	China
35	Dynamic Modeling and Robust Control for a Free-flying Flexible-link and Flexible-joint Space Manipulator with an Elastic Base	10	confirmed	Dr. xiaoyan yu	Fuzhou University	China
36	Vibration isolation for sensitive payloads of spacecrafts via Stewart platform with the X-shape supporting structure	10	withdrawn	Mr. xin wang	National Key Laboratory of Aerospace Flight Dynamics, Northwestern Polytechnical University	China
37	ultralight PBO composite overwrapped pressure vessels for lunar probes	10	confirmed	Dr. Fei Yan	Shanghai Institute of Space Propulsion	China
38	Multilayer Elastomeric Module (MEM) realization and testing for launch vehicle Thrust Oscillation Isolation System (TOIS)	10	confirmed	Mr. Chandramouli KC	Vikram Sarabhai Space Centre (VSSC)	India

session IP

Order

Time

Paper title

Mode

Presentation status

Speaker

Affiliation

Country