session IP

Title: Interactive Presentations - IAF MATERIALS AND STRUCTURES SYMPOSIUM
type: interactive
Description: This session offers a unique opportunity to deliver your key messages in an interactive presentation on any of the subjects of Materials and Structures addressed in the classic Sessions. The presentation will be displayed on a digital screen in a dedicated location and available for view by all Congress attendees for the entire Congress week. In addition, one afternoon is dedicated exclusively for the attendees to view the Interactive Presentations, and the author will be assigned a specific ten minute slot to personally present the topic and interact with the attendees present. The Interactive Presentation may take advantage of all electronic display capabilities, such as: PowerPoint charts, embedded hot links, pictures, audio and video clips etc. An award will also be presented to the author of the best Interactive Presentation in the C Category at a special ceremony. An Abstract that follows the standard format must be submitted by the deadline for standard IAC abstracts.
Room: IP Area (Hall B)

IPC members

Co-Chair: Dr. Jochen Albus, ArianeGroup, Germany;
Co-Chair: Mr. Alwin Eisenmann, Deutsche Gesellschaft für Luft-und Raumfahrt, Lilienthal-Oberth e.V. (DGLR), Germany;

papers
Paper title	Mode	Presentation status	Speaker	Affiliation	Country
Thin Polymer coating on Smart Optical Material, Aluminum-doped Zinc Oxide	10	confirmed	Mr. John Patrick Harris	Norfolk State University	United States
Structural Health Monitoring of Composite Materials using Coupled Nano devices and Acoustic Emission	10		Prof. Mostefa Bourchak	King Abdulaziz University	Saudi Arabia
Exploring SiC Polishing for Enhanced Large Aperture Optical Systems: Material Characteristics and Cryogenic Preparation Techniques	10	confirmed	Dr. Jeong-Yeol Han	Korea Astronomy and Space Science Institute/University of Science and Technology	Korea, Republic of
Investigating the Influence of a Multiple Launch Rocket System Dynamics on Rocket Range	10	confirmed	Mr. Hossam Eisa		Egypt
Using pyrotechnic devices in the development of separation systems for rocket and space technologies	10	confirmed	Mr. Anatolii Lohvynenko	Yuzhnoye State Design Office	Ukraine
Novel Damping Modes Using Bio-inspired Strategies	10	confirmed	Prof. Ranajay Ghosh	University of Central Florida (UCF)	United States
Calculation Method and Experiment Verification of Preload of Clamp Band Device Considering Temperature Influence	10	confirmed	Mr. Shipeng Kang	Aerospace System Engineering Shanghai, China	China
Evaluating the feasibility of using a variable-length polymer suborbital ultra-light launch vehicle	10	confirmed	Dr. Aleksandr Golubek	Oles Honchar Dnipropetrovsk National University	Ukraine
CFD investigation and optimization on the external aerodynamics of a sounding rocket	10	confirmed	Mr. Massimo Della Monica	Sapienza University of Rome	Italy
Investigating Carbon Fiber Reinforced Polymer Composites for Enhanced CubeSat Structural Design	10	confirmed	Mr. Yaqoob Alqassab	Bahrain Space Agency (BSA)	Bahrain
Evaluating Reduced-Order Methods for hypersonic vehicle aerodynamics	10	confirmed	Ms. Federica Portis	Politecnico di Torino	Italy
Static Structural Test and Analysis of Aluminum Skin Stringer Panels at Increased Rivet Spacing	10	confirmed	Dr. Hae Won Jang	Korea Aerospace Research Institute (KARI)	Korea, Republic of
Thermal and Vibrational Analysis of Peruvian 3U CubeSat CHASQUI II for Low-Earth Orbit Missions	10	confirmed	Mr. RAUL MARTIN FIGUEROA TERAN	Universidad Nacional de Ingeniería (Lima, Perù)	Peru
A PLANETARY GEAR MECHANISM FOR A COMPETITION ROCKET SEPARATION SYSTEM	10	confirmed	Mr. Ricardo Calle	Pontifical Catholic University of Peru	Peru
In House Design and Analysis of a 6U CubeSat Structural Frame	10	confirmed	Mr. Abdulrahman Sulaiman	Sharjah Academy for Astronomy, Space Sciences and Technology (SAASST)	United Arab Emirates
Passive Thermal Control System Design and Temperature Analysis of Thai Space Consortium-1 Satellite	10	confirmed	Mr. Chinphat Patanathabutr	National Astronomical Research Institute of Thailand (NARIT)	Thailand
Thermographic Characterization of ISiComp® Coating: A Comprehensive Analysis for Aerospace Thermal Protection Systems.	10	confirmed	Dr. Mario De Cesare	Centro Italiano Ricerche Aerospaziali	Italy
Analysis of the structural and dynamic behavior of a model rocket tensegrity fuselage during the ascent phase: Influence of motor forces on its mechanical response	10	confirmed	Ms. Abigail González-Alcázar	Universidad de Costa Rica	Costa Rica
Nonlinear thermo-elastic analysis of laminated composite structures for spacecraft	10	confirmed	Ms. Francesca Bracaglia	Politecnico di Torino	Italy
subsystems of a rover framed within the human exploration rover challenge 2022 hosted by nasa	10	confirmed	Mr. Alejandro Riaño	Space Generation Advisory Council (SGAC)	Colombia
A review of sulfur sources for making in-situ sulfur concrete on Mars	10	confirmed	Mr. MohammadMahdi Karbalaee	Tarbiat Modares University	Iran
VACUUM ARC COATINGS FROM HEAT-RESISTANT ALLOYS FOR COMBUSTION CHAMBERS OF LIQUID-PROPELLANT ROCKET ENGINES	10	confirmed	Dr. Iryna Husarova	Yuzhnoye State Design Office	Ukraine
Using High Speed Vision Measurement Method to Obtain the Dynamic Response of Impact Test Object in Full Field	10	confirmed	Mr. Peng Chen	Tongji University	China
The influence of the vibration test facility in the resonance frequencies measured on a satellite structure, introducing facility mechanical impedance in FEA and facility characterization.	10	confirmed	Dr. Andrea Cambiaghi	CENTROTECNICA	Italy
The Future Unfolds - Simplifying Polyhedral Space Habitat Module Deployment Using a Contiguous Unfolding Method	10	confirmed	Mr. Elliott Ruzicka		United States
The Development and On-ground Verification of Electromagnetic Flexible Deployment for Large Spacecraft Structure	10	confirmed	Dr. Jun Jiang	Shanghai Engineering Center for Microsatellites, Chinese Academy of Sciences (CAS)	China
Test and simulation in high-enthalpy atmospheric re-entry conditions of Multi-Phase Ultra-High-Temperature Ceramics	10	confirmed	Dr. Stefano Mungiguerra	Università degli Studi di Napoli “Federico II”	Italy
Sustainable Extraterrestrial Tool Making Using In Situ Resourcing	10	confirmed	Mr. Achintya Bairat	International Institute for astronautical Sciences (IIAS)	United States
Study of the influence of contact model parameters on a berthing operation	10	confirmed	Mr. Davide Sorli	Politecnico di Torino	Italy
Structural Design, Simulation, and Testing of the BIRDS-X Project’s Satellite Dragonfly	10	confirmed	Mr. Jorge Rubén Casir Ricaño	Kyushu Institute of Technology	Japan
Stress Analysis on Deployment of CFRP Bistable Boom under the Environment on the Moon	10	confirmed	Mr. Yuta Sunaga	Department of Engineering, The University of Tokyo	Japan
Spacecraft Materials Analysis in LEO and VLEO Orbits under Atomic Oxygen Interaction	10	confirmed	Mr. Salvatore Rea	Scuola Superiore Meridionale	Italy
Self-healing Materials for Spacecraft Structural Integrity Enhancement	10	confirmed	Mr. Zain Ahmad	Space Generation Advisory Council (SGAC)	Pakistan
Radiations effects on FPGA devices in space missions	10	confirmed	Dr. chafika belamri		Algeria
Protection performance of wedge-shaped corrugated sheets for MMOD shielding of spacecrafts.	10	confirmed	Mr. Sushir Subramani	ISAE - Institut Supérieur de l'Aéronautique et de l'Espace	France
Proposal for the construction of lunar module	10	confirmed	Mr. Gustavo Enrique Albarran Gonzalez	Universidad La Salle	Mexico
Polyimide-based materials with self-healing properties for lunar exploration missions	10	confirmed	Ms. Francesca Blondelli	Sapienza University of Rome	Italy
Performance of Spherical Tabletop Air Bearing for nanosatellites' ADCS Test Facilities: A survey of low-cost materials	10	confirmed	Mr. Abraham de Jesús Pablo-Sotelo	Instituto Politécnico Nacional	Mexico
Numerical transient model for thermomechanical fatigue investigation in metamaterials	10	confirmed	Mr. Tommaso Sironi	Politecnico di Bari	Italy
Numerical Simulation and Analysis of Shoulder Jet Heat Reduction for Mechanical Deployable Reentry Vehicles	10	confirmed	Dr. Junjie Sun	Beihang University (BUAA)	China
Numerical analysis of suspension detonation spray process	10		Dr. Ivan Yakovenko	Joint Institute for High Temperatures of the Russian Academy of Sciences	Russian Federation
Monitoring of fin flutter in a composite material based on natural fibers.	10	confirmed	Mr. Leonardo Bruno Ramirez Regino	Instituto Politécnico Nacional	Mexico
Modular Androgynous Standard Interface: A versatile solution for On-Orbit Servicing	10	confirmed	Dr. Giuseppe Ventura	CISAS – “G. Colombo” Center of Studies and Activities for Space, University of Padova	Italy
Modal Testing and Dynamic Simulation Verification Techniques for Shock Test.	10	confirmed	Mr. YEN TING LIU	Taiwan Space Agency (TASA)	Taipei
methods of protecting spacecraft and astronauts from radiation	10	confirmed	Ms. Melek Baghirova	National Aviation Academy - Azerbaijan	Azerbaijan
Investigation of thermal stability of a High-Strength & Corrosion-Resistant Nanocrystalline Aluminum Alloy	10	confirmed	Dr. Furkan Ozdemir	Ankara Yıldırım Beyazıt University	Türkiye
Investigation and Parametric Optimization of Laser Surface Texturing for Improved Microparticles Non-Sticking Capacity	10	confirmed	Dr. Guido Saccone	CIRA Italian Aerospace Research Center, Capua	Italy
Internal charging and discharging test of Solar Array Drive Mechanism	10		Mrs. Kemo Zhang	China Aerospace Science and Technology Corporation (CASC)	China
Innovative Geosynchronous orbit assembly of a refuelling station by a robotic arm	10		Mr. Romuald Duret	ISAE-Supaero University of Toulouse	France
In-Situ Regolith and Metal Fuel Reactions for Lunar and Martian Additive Manufacturing	10	confirmed	Mr. Connor MacRobbie	University of Waterloo	Canada
Impact of environmental regulations on availability of space-relevant materials and manufacturing processes	10	confirmed	Mr. Premysl Janik	European Space Agency (ESA-ESTEC)	The Netherlands
high reliability critical strain theory based structural design methodology to achieve a lightweight spaceborne electronics	10	confirmed	Mr. Kwangwoo Kim	School of Aerospace and Mechanical Engineering Korea Aerospace University	Korea, Republic of
Geometric Comparison of a Natural Rubber Pad for Vibration Mitigation in the payload of a sounding rocket	10	confirmed	Ms. Ariana Rossell Tapia Salas	Instituto Politécnico Nacional	Mexico
Fabrication of Carbon Fibers from CO2 via Molten Carbonate Electrolysis enabled by Additive Manufacturing Techniques	10	confirmed	Mr. Spencer Dansereau	University of Colorado Boulder	United States
Experimental and numerical investigation of mechanical performance of martian regolith reinforced polyethylene for in-situ manufacturing	10	confirmed	Ms. Flavia Palmeri	Sapienza University of Rome	Italy
Evaluation of Material Degradation in C/SiC Composite Subjected to Reentry Conditions	10	confirmed	Mr. Marco Riva	Politecnico di Milano	Italy
Enhancing Plastic 3D Printing with Electroless Plating for Selective Metallization using PdCl2 Catalyst: A Novel Approach for Space Applications	10		Mr. SIDDARTH KIRAN GOLE	R V College of Engineering, Bengaluru	India
Engineering Challenges in Structural Design and Analysis of Lightweight Superconducting Magnets for Space Applications	10	confirmed	Mr. Dominik Pridöhl	RWTH Aachen University	Germany
Dynamic modeling and simulation of a large angular velocity tumbling flexible propellant spacecraft	10	confirmed	Mr. Fuxiang Dong	China Academy of Space Technology (CAST)	China
Dynamic analysis of finite-boundary Miura-ori structures	10	confirmed	Mr. Seong Jae Choi	Korea Aerospace Research Institute (KARI)	Korea, Republic of
Development and characterization of an experimental setup to study cold-welding in microgravity conditions	10	confirmed	Dr. Leonardo Barilaro		Malta
Detailed thermal stresses and free-edge effects analysis of SSPS antenna panel	10	confirmed	Ms. Rebecca Masia	Politecnico di Torino	Italy
Design of an adaptive control algorithm with artificial neural network for optimizing the multi-blade airbrake in a high-power rocket	10	confirmed	Mr. Anibal Esquiembre	Universidad Nacional de Ingeniería (Lima, Perù)	Peru
Design and Prototyping of a Smart Propellant Tank for Spacecraft	10	confirmed	Mr. Ahmed E. S. NOSSEIR	University of Trento, Department of Physics, National PhD in Space Science and Technology	Italy
Epoxy-Ceramic as Anticorrosive Aircraft Coating	10	confirmed	Mr. Juan Efrén Carranco González	Instituto Politécnico Nacional	Mexico
Design and experimental study of high temperature heat pipe with alkali metal for heat transport at the leading edge of high speed aircraft wings	10	confirmed	Mr. Chen haipeng	China Academy of Launch Vehicle Technology (CALT)	China
design and development of primary structure for a 3u student satellite	10	confirmed	Mr. Surya Vaibhav DVR	BMS College of Engineering, Bengaluru	India
Design and development of a Mechanical Ground Support Equipment for a radially Opening origami structure in aerospace applications	10	confirmed	Mr. Andrea Troise	Politecnico di Bari	Italy
Design and Develop Advanced Robotic Contour Crafting Process	10	confirmed	Dr. SANDhYA RAO		India
Composite Material Testing and Structural Analysis for a 35 kN Ablatively Cooled Liquid Bi-propellant Rocket Engine	10	confirmed	Mr. Julian Cardenas	Concordia University	Canada
characterization and simulation of advanced coatings for space applications	10	confirmed	Mr. Riccardo Mantoan	ATLA srl	Italy
Buckling behavior of CFRP bistable open-section boom under various fixed cross-sections and load directions	10	confirmed	Mr. Shouya Yamashita	The University of TOKYO, Graduate school	Japan
Bio-inspired Recovery Systems: Learning from Nature to Improve Spacecraft Retrieval	10		Mr. SIDDARTH KIRAN GOLE	R V College of Engineering, Bengaluru	India
Behavior Analysis of Free Space Capture for Inter-Spacecraft Material Transfer	10	confirmed	Mr. Yuto Nakagawa	The University of TOKYO, Graduate school	Japan
Banana Peel Starch Bioplastics in Cubesats Structures	10	confirmed	Mr. César Iván Rosas Barrera	Instituto Politécnico Nacional	Mexico
Assessment of the manufacturing feasibility of the flexible TPS by filament winding	10	confirmed	Dr. Artem Andrianov	University of Brasilia	Brazil
Assembly of Launch Vehicle and Payload Models with Localized Lagrange Multiplier for Coupled Load Analysis	10	confirmed	Mr. Seung Chan Lee	Korea Advanced Institute of Science and Technology (KAIST)	Korea, Republic of
ai-based predicting large deployable structure thermal deformation on-orbit	10	confirmed	Mr. Henghui Zhou	Nanjing University of Aeronautics and Astronautics	China
Advancing Experimental Rocketry: FDM-Enabled Ceramic Nozzles for Low-budget Experimental Propellants	10	confirmed	Mr. Diego Pérez Reyes	Instituto Tecnológico Autónomo de México	Mexico
Advancements in Organic-Inorganic Hybrid (OIH) Ferroelectrics: From Synthesis to Applications in Electronics and Aerospace Engineering	10	confirmed	Ms. Urszula Wiśniewska	Wroclaw University of Science and Technology	Poland
Adhesion capture dynamics of of space docking mechanism based on bionic adhesion functional surface	10	confirmed	Dr. Dongwu Li	Northwestern Polytechnical University	China
Additively manufactured aerospace structures utilizing 3D-printed bioplastic derived from avocado waste	10	confirmed	Ms. Ariana Rossell Tapia Salas	Instituto Politécnico Nacional	Mexico
A Universal Kinematic Modelling Method for Multi-arms Space Robot with Variable Topology	10	confirmed	Mr. Hongxu Wang	Harbin Institute of Technology	China
A special insulated pass-through for cryogenics	10	confirmed	Mr. Andrea Zanin	Research Consortium Hypatia	Italy
Flexural and interlaminar shear strength with EMI shielding performance of CF/CNTF hybrid composite	10	confirmed	Ms. MIJOUNG JOUNG	Yonsei University	Korea, Republic of
Graphene and graphene-like materials for sensors and actuators in aerospace: a review and technology landscape	10	confirmed	Dr. Marco Di Clemente	Italian Space Agency (ASI)	Italy
Functional behaviour of Niti complex geometries for innovative smart structures manufactured by Selective Laser Melting	10	confirmed	Ms. Tiziana Biasutti	Politecnico di Milano	Italy
Improved thermal dissipation through additive manufactured composite conductive polymer elements. A Structural and Thermal Model for CubeSat applications	10	confirmed	Dr. Franco Maria Di Russo	Sapienza University of Rome	Italy
Integrated AI-Powered Failure Prediction System for Self-healing Polymer Materials from Simulation to Post-Space Deployment Level: using System Engineering Framework	10	confirmed	Ms. Palvi Garg	Embry-Riddle Aeronautical University	United States
Investigation of ultra-lightweight and autonomous deployment systems for solar sails	10	confirmed	Mr. Julius Karlapp	Technische Universität Dresden (DTU)	Germany
Mass-Efficient Temperature Stabilization Device Design for NanoSat System and its Implementation	10	confirmed	Dr. Kikuko Miyata	Meijo University	Japan
study for characteristic evaluation of the parylene conformal coating under the integrated space environments	10	confirmed	Dr. You gwang KIM	Korea Aerospace Research Institute (KARI)	Korea, Republic of

session IP

Paper title

Mode

Presentation status

Speaker

Affiliation

Country