• Home
  • Current congress
  • Public Website
  • My papers
  • root
  • browse
  • IAC-16
  • B2
  • 7
  • paper

    • INTER SATELLITE COMMUNICATION MODULES FOR ARAMIS SMALL SATELLITES

    Paper number

    IAC-16,B2,7,7,x31819

    Coauthor

    Dr. M.Rizwan Mughal, Institute of Space Technology (IST), Pakistan

    Coauthor

    Mr. Anwar Ali, Politecnico di Torino, Italy

    Year

    2016

    Abstract
    The AraMiS design approach aims to build modular satellites configurable in different shapes and
sizes. Each module is independent from the other and capable of working in stand-alone mode when
plugged or integrated. The communication among the panel bodies, known as tiles, takes place through
proper buses. Each module has a specific role and can work alone or together with other modules to
improve the performance of the system.
This work presents the idea to develop a constellation of such satellites able to communicate with each
other; exchange generic messages; measure the distances inside the constellation and modify the distance according to the user needs.
 A constellation made of two satellites is considered for initial phase. 
Based on the modular design philosophy, the communication satellite takes magnetometer, magnetic actuator and a solenoid module from the AraMiS project and modifies the telecommunication subsystem according to inter-satellite design requirements.
 One surface houses the radio frequency electronics, whereas the other one contains solar cells to supply power to the satellite subsystems.
The communication module is based on CC2510 system on chip transceiver, power amplifier and
antenna for transmission. A similar transceiver is used for reception on the receiving satellite. 
The system uses the simpliciTI protocol for communication purposes.
One of the purposes of the system is to measure the distance between two satellites. This is achieved
using receive signal strength indicator (RSSI) measurement technique and magnetic field measurement
techniques (generation and measurement of magnetic field). Another important purpose of the system is
to control the distance between two satellites in orbit. The general structure of the system is completely
described and documented by using Unified Modelling Language (UML). This work will elaborate the use
of UML design technique at hardware/ software level for the communication subsystem.
    Abstract document

    IAC-16,B2,7,7,x31819.brief.pdf

    Manuscript document

    (absent)